Signal Generator & Amplifier

Provides sine, square or triangular waveforms . Frequency selection is by a switched range and continuously variable fine adjustment control. The frequency is displayed on an LED display. All connections are via pairs of labelled 4mm sockets with one of each pair connected to earth.

An illuminated on/off switch is mounted on the rear panel adjacent to a fused IEC mains inlet. Enclosed in a robust metal case with a durable powder coated finish.

Electrical Supply: 220-240VAC, 50-60Hz

Dimensions: 255 x 220 x 110mm overall

Mass: 3.2kg

Sig. Gen. Mode > :

Waveforms: Sine, Square & Triangular, sinewave distortion 1% on all ranges, square wave rise time 1µs approx.

Frequency Range: 0.1Hz to 100kHz in six ranges, accuracy ±5% on all ranges

Voltage Output: 0 to 10V (peak to peak), continuously variable across all ranges & waveforms

4Ω Output: Power output of 4W over entire frequency & waveforms, will drive loudspeaker or other suitable devices

600Ω Output: Provides attenuation settings: x 1, x 0.1 & x 0.01, all ±5%

Amplifier Mode > :

Performance: Voltage gain 0 to 100, Input impedance 1MΩ, Max. input 200mV (pk to pk), Output spec. same as above

Frequency Response: Frequency response 1Hz to 100kHz (-3dB bandwidth)