LCR METER

The ES7010 is a high precision LCR meter with basic accuracy 0.15% and maximum measurement frequency 10kHz. The 5-digit 4.3-inch TFT LCD display gives easy reading. The RS-232 interface facilitates in remote control and analysis of measurement results. With its fast measurement speed, wide frequency range and low cost, the ES7000 series are widely used in R&D, IQC, online quality control and automatic test system.

Features:
32-bit core processor
5-digit 4.3-inch TFT LCD display
2 signal source output impedance: 30 Ω, 100 Ω
100 sets memories for internal storage/save
500 memories for U disk storage/save, supports FAT16 and FAT32 files
Save the last parameter settings before power off
Standard interface: RS-232, HANDLER, USB HOST
Optional interface: USB DEVICE, GPIB, headset, FOOT.C foot switch

Specifications:
Test parameter: | Z|, |Y|, C, L, X, B, R, G, D, Q, ?
Test Signal Frequency: 100Hz,120Hz,1kHz,10kHz
Basic Accuracy: 0.15%
Equivalent circuit: Series, Parallel
Mathematical function:Deviation and Percent Deviation
Range mode:Auto, Hold, Manual Selection
Trigger mode:Internal, Manual, External, BUS
Measurement speed: Fast: max.30, Medium: 10, Slow: 3 (times/second) ((?1kHz))
Average times: 1-255
Delay time: 0-60s, step 1ms
Calibration function: Open circuit, Short circuit, Load
Measurement terminal: 5 terminal
Display mode: Direct, ?, ?%, V/I (monitoring tested voltage and current)
Display: 5 digit 4.3-in LCD display

Measurement Signal:
Output impedance: 30 Ω, 100 Ω
Test level: 0.1V, 0.3V, 1V
Test level accuracy: 5%

Measurement display range:
|Z|, R, X:0.01 M Ω – 99.999 M Ω
|Y|, G, B: 0.0001μS – 99.999 μS
C:0.0001 pF – 9.9999 F
L:0.0001 H – 999.99 H
D:0.0001 – 9.9999
Q:0.0001 – 9999.9
(DEG):-179.99 ?-179.99 ?
(RAD):-3.14159 – 3.14159
%:-999.99% – 999.99%

Comparator and interface
Memory: 100 sets memories for internal parameter settings storage/save; 500 sets for U disk parameter settings storage/save
Standard interface: Standard: RS232, USB HOST
Optional interface: USB device, GPIB

General:
Operating environment:0°C – 40°C, 80%RH
Power source: 110/220V≈10%, 47~63Hz
Power consumption: ≈ 30VA
Accessories: 4-terminal Kelvin test clip leads, RS232 cable, power cord, operation manual
Dimensions: 265W*100H*340D mm
Weight: Approx.3.5kg